What are the inspection methods of fuse holder? Let us know with our supplier.

The inspection method of fuse holder is as follows:

1.the appearance of inspection

After a period of application,it is likely that there will be some problems,so in the case of application,it should be checked often.For its appearance,it should be checked first:

(1) to see its appearance of the foot position and its surface parts,there is no rust,or deformation or broken foot.

(2) check the surface for any contaminants, whether there are scars.

(3) see if there is deformation or cracks and other conditions exist,in order to make it in the whole process of application,you can ensure that there is a good practical effect,then be sure to ensure that the appearance is in line with the provisions.

2.the function of inspection

In order to ensure that the fuse holder has good practical application results,some of its functions should be checked:

(1) Use electric welding iron to weld the tin wire to the seat foot to see if it can be welded to the steel.If it cannot be welded to the steel, or the welding area is too small,it may affect the use of the product.

(2) can be directly installed with a fuse,if just can be installed,it means that the use effect is high,if too loose or can not be installed,it means that the selected product is not standard.

3.Check the size of the product

After fuse seat in choose and buy,want to examine its appearance and specification,see its specification is consistent with the specification that shows on the place on outer packing box,if specification is inconsistent,can endanger the application actual result of commodity.

The above is the fuse holder inspection method. we are a professional fuse holder manufacturer,to provide you with professional fuse holder knowledge,I hope to help you!