How to deal with the way of fuse blowing? Let's follow the wire harness fuse manufacturer to find out.

Automobile fuse is a simple and effective safety protection component, a piece of metal wire or metal sheet with design requirements, in case of overcurrent, timely cut off the current, protect the circuit and other equipment. Replacing a car fuse after a blowout cannot completely solve the problem. It is possible that the fuse in this position will blow again. Because the fuse is a warning signal, indicating that there are fuse factors in the circuit exist, which is conducive to our correct judgment of the vehicle circuit problems.

The factors that cause a car fuse to fusing are:

The load is too large, many electronic products concurrently exceed the load of the main circuit, or the failure of an electronic product causes the current to increase; Short circuit, battery or generator misconnection, insulation failure, improper placement of tools, etc., can cause short-time, sometimes the failure state of some components in the circuit is displayed as resistance becomes larger, the back end circuit works normally, causing the current to increase and fuse.

A quick fuse replacement requires familiarity with the car, and different models combine fuses in one place. If you find a blown car fuse, do not replace it with a fuse of similar size. Please note the source of the fuse.

Normalize the production of automobile fuse material qualified, complete packaging, correct current label; In addition to the material does not meet the standard, to the current label and actual rated current does not meet the standard. The use of fuses not in accordance with the provisions, resulting in casualties of automobile accidents still happen

When selecting the car fuse, be sure to produce the product according to the rules, the material and fuse time will do well to effectively protect the circuit. Many of the fuses on the market are aluminum sheets, which cannot be fused precisely because they do not conduct electricity in a timely manner

The above is the introduction of "fuse fuse treatment", need to know more about the wiring harness fuse holder details, welcome to contact our fuse factory to understand.