Fuse Blocks – Automotive

car fuse blocks for power distribution in automotive, marine, motorcycle, RV, and other 12 volt and 24 volt electrical systems. Fuse blocks are available in 2 to 12 circuits. Most of our fuse blocks and fuse panels use the ATC style fuse, but we also carry some that use the AGC fuse, and the higher power AGU and ANL fuses. Some of the blocks come with clear covers. A fuse block can either be independent, where each fused circuit has an input wire and an output wire, or ganged, where power is shared among all the circuits. Independent fuse blocks require two wires to be run for each fuse, one from the power source, and one to the accessory. A ganged fuse panel requires a heavier power wire to be run to the panel, and a single wire runs out to each accessory in the system.
Automotive fuses are used to protect the wiring and electrical equipment for vehicles. There are several different types of automotive fuses and their usage is dependent upon the specific application, voltage, and current demands of the electrical circuit. Automotive fuses can be mounted in fuse blocks, inline fuse holders, or fuse clips. Some automotive fuses are occasionally used in non-automotive electrical applications. Standards for automotive fuses are published by SAE International (formerly known as the Society of Automotive Engineers).

FUSE HOLDER/6-WAY PLUG FUSE HOLDER/CAR INSURANCE SEAT BANL-B6

Product Name：Fuse Holder/6-way plug fuse holder/Car insurance seat
model：BANL-B6
Voltage breakdown:AC1500 1minute
insulation resistance: DC 500V 100MΩ M
Rating:32V-150V DC 1A-400A
Temperature tolerance:-30℃ -150 ℃
Flammability class:UL94V0
Standard: IEC-60335-1 GB_9364.6-2001
Certification: ISO9001, ROHS,
Mounting Ways：Rails, bolts
Material：Hot silicone rubber, 8.8 bolts.
Fuse size：Medium Plug Fuse
Application:Applicable to all cars, electric cars, audio and other equipment

WATERPROOF FUSE HOLDER/SMALL CAR FUSE HOLDER H3-82

Product Name：Waterproof fuse holder/Small car fuse holder
model：H3-82
Voltage breakdown:AC1500 1minute
insulation resistance: DC 500V 100MΩ M
Rating:30A 32VDC
Temperature tolerance:-30℃ -150 ℃
Flammability class:UL94V0
Standard: IEC-60335-1 GB_9364.6-2001
Certification: ISO9001, ROHS,
Mounting Ways：Lead type
Material：Hot silicone, brass.
Fuse size：Large insert fuse
Application:Applicable to all cars, electric cars, audio and other equipment

Automotive fuses can be classified into four distinct categories:

Blade fuses
Glass tube or Bosch type
Fusible links
Fuse limiters
Most automotive fuses rated at 32 volts are used on circuits rated 24 volts DC and below. Some vehicles use a dual 12/42 V DC electrical system[9] that will require a fuse rated at 58 V DC       HINEW FUSE HOLDER PRICE